American Strapping Company is capable of providing you with all of your strapping & packaging needs. Whether you are in need of Strapping, Stretch Film, Angleboards, Tools, or Repair, American Strapping Company can meet those needs. Check out our Products page for more information on the products and services we offer.

HIGH RECOVERY NYLON PLASTIC STRAPPING

CENTER EMBOSSEDCENTER EMBOSSEDSMOOTH FINISHSMOOTH FINISH
CENTER EMBOSSED

If you want your load to always stay tight, High Recovery Nylon is the ONLY plastic strapping that always stays tight as the load shrinks or settles.

ASC High Recovery Nylon is a competitively priced high abrasion resistant product with excellent "memory," allowing for high tension recovery on loads that settle and shift in transit or storage. HR Nylon is the latest product development in the long history of nylon strapping.

This product has proven successful on loads such as: large rolls of plastic pipe and electric cable, formica products, boxes on pallets, masonite sheets, and plastic lumber. Standard two-piece tooling with scored/grit seals (serrated), manual combination tools or friction weld tools may be used with ASC HR Nylon Strapping.

Standard Color: Black.

High Recovery Nylon is a North American made product.

WHY IS HIGH RECOVERY NYLON THE BEST?

HIGH RECOVERY NYLON PLASTIC STRAPPING
PART NUMBER
STRAP SIZE
SEALS/BUCKLES
FEET PER COIL
COILS PER SKID
AVERAGE BREAK STRENGTH
CORE SIZE
GRADE
COLOR
PRICE
CENTER EMBOSSED
5/8
5,300'
24
1,000 lbs
16
S
BLACK
5/8
4,200'
24
1,300 lbs
16
S
BLACK
5/8
3,800'
24
1,400 lbs
16
S
BLACK
PART NUMBER
STRAP SIZE
SEALS/BUCKLES
FEET PER COIL
COILS PER SKID
AVERAGE BREAK STRENGTH
CORE SIZE
GRADE
COLOR
PRICE
SMOOTH
3/4
3,000'
24
1,700 lbs
16
S
BLACK
3/4
2,500'
24
2,100 lbs
16
S
BLACK
TABLE REFERENCE
Strapping break strengths are listed as averages. Always use linear break when calculating break strength. Refer to the American Society for Testing Materials (ASTM D3950) minimum break strengths for package design/safety factor purposes. All measurement, size, footage, tensile, thickness, are nominal measurements based on an average measurement made on a number of samples. Variation in measurements are due to standard manufacturing practices. For proper strapping selection, contact your ASC sales representative
F = Fully Automatic, S = Semi Automatic, H = Hand Grade
If you do not see the size you are needing, please Contact a Sales Representative

MANUAL TENSIONERS

COMBINATION TOOLS

BATTERY FRICTION WELD TOOLS

PLASTIC STRAPPING SEALS

PLASTIC STRAPPING COMPARISON CHART
FEATURE
NYLON
POLYESTER
POLYPROPYLENE
Most elongation at Practical Tensioning Levels (>200 lbs)
BEST FAIR BETTER
Initial Tightness (after joint made)
BEST BETTER FAIR
Tightness Over Time
BEST BEST BETTER
Tightness At Temperature Extremes and With Temperature Changes
BEST BEST BETTER
Ability to Accommodate Load Shift or Contraction
BEST FAIR BETTER
Highest Tensile Strength
BEST BEST FAIR
Weathering Resistance
BEST BEST BEST
Stain Resistance
BEST BEST BEST
Impact Resistance
BEST BETTER BEST
Impact Around Corners
BEST BEST BEST
Ability to Transmit Tension Around Corners
BEST BETTER BETTER
Surface Hardness
BEST BEST BETTER
Resistance to Longitudinal Splitting
BEST BETTER BETTER
Ease of Disposal
BEST BEST BEST
Lightest Weight Per Foot
BETTER FAIR BEST
Lowest Cost
BETTER BETTER BEST
Ability to Resist Creep on an Expanding Package
BETTER BEST FAIR
Abrasion Resistance
BEST BETTER FAIR